HCL for Oracle Solaris OS

Submit Hardware | Return to Previous Page
Send Feedback to the HCL team
 
Detail
Type: Server System
Manufacturer: IBM
Model: System x3850 X5 (7145-5RY)
Support: Solaris Premier Subscription  available on Certified Systems
Runs on OS Versions: Oracle Solaris 11 11/11    Reported to Work
Oracle Solaris 10 10/09 to Oracle Solaris 10 1/13    Certified
Components:
Component used.		 Components submitted with system:
1: Disk Controller
2: Networking
CPU Type: Intel Xeon CPU X7560@2.27GHz
Num CPUs: 4
Num Cores (per CPU): 8
Chipset: Intel Boxboro
BIOS/UEFI:
 Firmware Maker and Version		 UEFI: IBM G0E107DUS-1.02- 03/12/2010, IMM: YU0056K 03/12/2010
BIOS/UEFI:
Non-Standard Settings		 See General Notes section
Test Suite: true
(May not apply to all OS Revisions. Please refer to 'General Notes')
General Notes: Non-standard BIOS Setting:
There is no support for UEFI in Solaris. Booting/Installing over the net is accomplished via legacy support on the network interface.

To configure an interface for legacy support:
Select Setup as the system is booting -> Select System Settings ->Select Network -> Select PXE Configuration -> Select Port -> Go to the Enable PXE item -> Change entry to Legacy Support

x3850 X5 hangs intermittently on reboot at UEFI screen and the bottom part of the UEFI screen keeps on blinking. This issue is seen when "Remote Console Redirection" is enabled, and it works fine when it is disabled.

The certified system was configured with the following.
- 4U Rack Server Chasis
- ServerRAID MR5015 SAS/SATA (PN #46M0829) controller in a RAID 5 configuration.
- Emulex 8Gb FC Dual-Port HBA(42D0494)
- Intel Pro1000 PT Dual-port ethernet adapter(39Y6126)
Submitter Company: Oracle America, Inc.
Last Updated: 2011-05-23

'prtconf -pv' Output Information

PCI Information: [+] Show

View the prtconf information submitted. You can see the PCI information parsed out as well.
Open 'prtconf -pv' in separate window.