HCL for Oracle Solaris OS

Submit Hardware | Return to Previous Page
Send Feedback to the HCL team
 
Detail
Type: Server System
Manufacturer: IBM
Model: System x3650 M3 (7945)
Support: Solaris Premier Subscription  available on Certified Systems
Runs on OS Versions: Oracle Solaris 11 11/11    Reported to Work
Oracle Solaris 10 10/09 to Oracle Solaris 10 1/13    Certified
CPU Type: Intel Xeon CPU X5680@3.33GHz
Num CPUs: 2
Num Cores (per CPU): 6
Chipset: Intel 5520 Chipset
BIOS/UEFI:
 Firmware Maker and Version		 UEFI:IBM D6E145FUS-1.07 4/26/2010,IMM:IBM YU0057H-1.10 3/3/2010
BIOS/UEFI:
Non-Standard Settings		 See General Notes section
Test Suite: true
(May not apply to all OS Revisions. Please refer to 'General Notes')
General Notes: This server is certified on Solaris 10 10/09
CPU: dual 6-core Intel Xeon CPU X5680 3.33GHz
ServerRAID MR5015 SAS/SATA Controller in a RAID 5 configuration
Bios/Firmware Maker and Version:
UEFI: D6E148BUS-1.08- 06/25/2010 IMM YUOO73M
Certified with the following I/O cards:
IBM 39Y6136 Intel PRO/1000 PT Quad Port Adapter
IBM 49Y4220 Broadcom NetXtreme II Quad Port Adapter
IBM 49Y4240 Intel Quad Port Ethernet Server Adapter

IBM 49Y4240 is not supported in Solaris 10 10/09 and needs patch 143910-06 or higher for it to be configured in Solaris 10 10/09.

Non-standard BIOS Setting:
There is no support for UEFI in Solaris. Booting/Installing over the net is accomplished through the legacy interface.
To configure an interface for legacy support:
Select Setup as the system is booting -> Select System Settings ->
Select Network -> Select PXE Configuration -> Select Port ->
Go to the Enable PXE item -> Select Legacy Support
-------------------------------------------------------------------------------------------------------------
This server is certified on Solaris 10 10/09
Non-standard BIOS Setting:
There is no support for UEFI in Solaris. Booting/Installing over the net is accomplished via legacy support on the network interface.

To configure an interface for legacy support:
Select Setup as the system is booting -> Select System Settings -> Select Network -> Select PXE Configuration -> Select Port -> Go to the Enable PXE item -> Change entry to Legacy Support

The certified system was configured as follows:
- 2U Rack Server Chasis
- ServerRAID MR5015 SAS/SATA (PN #46M0829) controller in a RAID 5 configuration.
- Qlogic 8Gb FC Dual-Port HBA (42D0512)
Submitter Company: Oracle America, Inc.
Last Updated: 2011-05-23

'prtconf -pv' Output Information

PCI Information: [+] Show

View the prtconf information submitted. You can see the PCI information parsed out as well.
Open 'prtconf -pv' in separate window.