Table Detail Report
PULSE_GEN_SET_CHAN
| Column Section | Relationship Section | Top of Page |
Table-level Detail
| Description: | Pulse Generator Channel Settings |
| Definition: | Contains information about lead voltage channel settings for a pulse generator |
| Table Type: | ACTIVITY |
Column Detail - PULSE_GEN_SET_CHAN
| Column Name | Type | Null? | Definition |
|---|---|---|---|
| CHAMBER_CD | NUMBER | N | Defines which chamber of the heart this channel is located. If this channel is a high voltage channel, this value will be zero. |
| HVCHAN_IND | NUMBER | N | One if this channel is a high voltage channel. Zero otherwise. |
| PACING_AMPLITUDE_VALUE | NUMBER | N | The pacing output amplitude in volts. If this channel is a high voltage channel, this value will be zero. |
| PACING_CAPTURE_MODE_CD | NUMBER | N | The method the device uses for managing pacing capture. If this channel is a high voltage channel, this value will be zero. |
| PACING_POLARITY_CD | NUMBER | N | The indication of unipolar or bipolar configuration for pacing. If this channel is a high voltage channel, this value will be zero. |
| PACING_PULSEWIDTH_VALUE | NUMBER | N | The pacing output pulse width in milliseconds. If this channel is a high voltage channel, this value will be zero. |
| PULSE_GEN_SET_CHAN_ID | NUMBER | N | PRIMARY KEY |
| PULSE_GEN_SET_ID | NUMBER | N | The pulse generator setting associated with this channel setting |
| SENSING_ADAPTATION_MODE_CD | NUMBER | N | Specifies whether the sensitivity is fixed or adapting. If this channel is a high voltage channel, this value will be zero. |
| SENSING_POLARITY_CD | NUMBER | N | The indication of unipolar or bipolar configuration for sensing. If this channel is a high voltage channel, this value will be zero. |
| SENSING_SENSITIVITY_VALUE | NUMBER | N | The smallest electrical signal programmed to be detected by the device's sensing circuitry in millivolts. If this channel is a high voltage channel, this value will be zero. |
| UPDT_APPLCTX | NUMBER | N | The application context number from the record info block. |
| UPDT_CNT | NUMBER | N | Set to 0 on insert. Incremented by 1 on update. Used to recognize update conflict where data in a row updated by one application is at risk of being lost by a second application attempting to update the row. |
| UPDT_DT_TM | DATE | N | The date and time the row was last inserted or updated. |
| UPDT_ID | NUMBER | N | The person_id of the person from the personnel table (prsnl) that caused the last insert or update of the row in the table. |
| UPDT_TASK | NUMBER | N | The registered (assigned) task number for the process that inserted or updated the row. |
Relationship Detail - PULSE_GEN_SET_CHAN
| Child Column in PULSE_GEN_SET_CHAN(FK) | Parent Table Name | Parent Column Name | |
|---|---|---|---|
| Parents: | PULSE_GEN_SET_ID | PULSE_GEN_SET | PULSE_GEN_SET_ID |
| Parent Column in PULSE_GEN_SET_CHAN (PK) | Child Table Name | Child Column Name | |
|---|---|---|---|
| Children: | PULSE_GEN_SET_CHAN_ID | PULSE_GEN_SET_NODE | PULSE_GEN_SET_CHAN_ID |
PULSE_GEN_SET_CRT
| Column Section | Relationship Section | Top of Page |
Table-level Detail
| Description: | Pulse Generator CRT Setting |
| Definition: | Contains information about CRT settings for a pulse generator |
| Table Type: | ACTIVITY |
Column Detail - PULSE_GEN_SET_CRT
| Column Name | Type | Null? | Definition |
|---|---|---|---|
| LVRV_DELAY_VAL | NUMBER | Y | The time between the LV and RV pacing pulses in milliseconds |
| PACED_CHAMBERS_CD | NUMBER | N | The ventricular chambers paced during CRT pacing |
| PULSE_GEN_SET_CRT_ID | NUMBER | N | PRIMARY KEY |
| PULSE_GEN_SET_ID | NUMBER | N | The pulse generator setting associated with this channel setting |
| UPDT_APPLCTX | NUMBER | N | The application context number from the record info block. |
| UPDT_CNT | NUMBER | N | Set to 0 on insert. Incremented by 1 on update. Used to recognize update conflict where data in a row updated by one application is at risk of being lost by a second application attempting to update the row. |
| UPDT_DT_TM | DATE | N | The date and time the row was last inserted or updated. |
| UPDT_ID | NUMBER | N | The person_id of the person from the personnel table (prsnl) that caused the last insert or update of the row in the table. |
| UPDT_TASK | NUMBER | N | The registered (assigned) task number for the process that inserted or updated the row. |
Relationship Detail - PULSE_GEN_SET_CRT
| Child Column in PULSE_GEN_SET_CRT(FK) | Parent Table Name | Parent Column Name | |
|---|---|---|---|
| Parents: | PULSE_GEN_SET_ID | PULSE_GEN_SET | PULSE_GEN_SET_ID |
PULSE_GEN_SET_MAG
| Column Section | Relationship Section | Top of Page |
Table-level Detail
| Description: | Pulse Generator Magnet Settings |
| Definition: | Contains information about magnet settings for a pulse generator |
| Table Type: | ACTIVITY |
Column Detail - PULSE_GEN_SET_MAG
| Column Name | Type | Null? | Definition |
|---|---|---|---|
| MAGNET_RESPONSE | VC2(100) | Y | A description of how the device responds to a magnet |
| PULSE_GEN_SET_ID | NUMBER | N | The pulse generator setting associated with this magnet setting |
| PULSE_GEN_SET_MAG_ID | NUMBER | N | PRIMARY KEY |
| UPDT_APPLCTX | NUMBER | N | The application context number from the record info block. |
| UPDT_CNT | NUMBER | N | Set to 0 on insert. Incremented by 1 on update. Used to recognize update conflict where data in a row updated by one application is at risk of being lost by a second application attempting to update the row. |
| UPDT_DT_TM | DATE | N | The date and time the row was last inserted or updated. |
| UPDT_ID | NUMBER | N | The person_id of the person from the personnel table (prsnl) that caused the last insert or update of the row in the table. |
| UPDT_TASK | NUMBER | N | The registered (assigned) task number for the process that inserted or updated the row. |
Relationship Detail - PULSE_GEN_SET_MAG
| Child Column in PULSE_GEN_SET_MAG(FK) | Parent Table Name | Parent Column Name | |
|---|---|---|---|
| Parents: | PULSE_GEN_SET_ID | PULSE_GEN_SET | PULSE_GEN_SET_ID |
PULSE_GEN_SET_NODE
| Column Section | Relationship Section | Top of Page |
Table-level Detail
| Description: | Pulse Generator Node |
| Definition: | Contains information about a pulse generator lead channel anode or cathode |
| Table Type: | ACTIVITY |
Column Detail - PULSE_GEN_SET_NODE
| Column Name | Type | Null? | Definition |
|---|---|---|---|
| ELECTRODE_1_CD | NUMBER | N | Defines the type of electrode for the node |
| ELECTRODE_2_CD | NUMBER | N | Defines the type of electrode for the node |
| ELECTRODE_3_CD | NUMBER | N | Defines the type of electrode for the node |
| LOCATION_1_CD | NUMBER | N | Defines the location of the node |
| LOCATION_2_CD | NUMBER | N | Defines the location of the node |
| LOCATION_3_CD | NUMBER | N | Defines the location of the node |
| NODE_FUNCTION_CD | NUMBER | N | Whether this node is a sensing or a pacing node |
| NODE_TYPE_CD | NUMBER | N | Whether this node is an anode or a cathode |
| PULSE_GEN_SET_CHAN_ID | NUMBER | N | The channel setting associated with this node |
| PULSE_GEN_SET_NODE_ID | NUMBER | N | PRIMARY KEY |
| UPDT_APPLCTX | NUMBER | N | The application context number from the record info block. |
| UPDT_CNT | NUMBER | N | Set to 0 on insert. Incremented by 1 on update. Used to recognize update conflict where data in a row updated by one application is at risk of being lost by a second application attempting to update the row. |
| UPDT_DT_TM | DATE | N | The date and time the row was last inserted or updated. |
| UPDT_ID | NUMBER | N | The person_id of the person from the personnel table (prsnl) that caused the last insert or update of the row in the table. |
| UPDT_TASK | NUMBER | N | The registered (assigned) task number for the process that inserted or updated the row. |
Relationship Detail - PULSE_GEN_SET_NODE
| Child Column in PULSE_GEN_SET_NODE(FK) | Parent Table Name | Parent Column Name | |
|---|---|---|---|
| Parents: | PULSE_GEN_SET_CHAN_ID | PULSE_GEN_SET_CHAN | PULSE_GEN_SET_CHAN_ID |
PULSE_GEN_SET_SHOCK
| Column Section | Relationship Section | Top of Page |
Table-level Detail
| Description: | Pulse Generator Shock Zone Settings |
| Definition: | Contains information about shock zone settings for a pulse generator |
| Table Type: | ACTIVITY |
Column Detail - PULSE_GEN_SET_SHOCK
| Column Name | Type | Null? | Definition |
|---|---|---|---|
| PULSE_GEN_SET_SHOCK_ID | NUMBER | N | PRIMARY KEY |
| PULSE_GEN_SET_ZONE_ID | NUMBER | N | The pulse generator zone setting ID associated with this shock zone |
| SHOCK_CNT | NUMBER | Y | The maximum number of shocks set to be delivered at the given shock energy |
| SHOCK_ENERGY_AMT | NUMBER | Y | The shock energy delivered at a particular sequence of a zone therapy in joules |
| UPDT_APPLCTX | NUMBER | N | The application context number from the record info block. |
| UPDT_CNT | NUMBER | N | Set to 0 on insert. Incremented by 1 on update. Used to recognize update conflict where data in a row updated by one application is at risk of being lost by a second application attempting to update the row. |
| UPDT_DT_TM | DATE | N | The date and time the row was last inserted or updated. |
| UPDT_ID | NUMBER | N | The person_id of the person from the personnel table (prsnl) that caused the last insert or update of the row in the table. |
| UPDT_TASK | NUMBER | N | The registered (assigned) task number for the process that inserted or updated the row. |
| ZONE_SEQ | NUMBER | Y | The sequence number for this shock setting, from 1 to 10 |
Relationship Detail - PULSE_GEN_SET_SHOCK
| Child Column in PULSE_GEN_SET_SHOCK(FK) | Parent Table Name | Parent Column Name | |
|---|---|---|---|
| Parents: | PULSE_GEN_SET_ZONE_ID | PULSE_GEN_SET_ZONE | PULSE_GEN_SET_ZONE_ID |